Izdelki za jeklena jekla (26213)

Custodie impermeabili con grado di protezione IP67 o IP68 per uso esterno non sono automaticamente sigillate contro il vapore e l'aria umida. Per evitare la pressione negativa, l'umidità elevata e la condensa all'interno della custodia è necessaria una ventilazione e un equilibrio di pressione costanti. Questa funzione può essere ottenuta utilizzando un elemento di sfiato prodotto da Jacob. Caratteristiche: - Ventilazione continua e adattamento sulla pressione interna - Membrana PES idrofobica e oleofobica - Corpo in acciaio inossidabile 1.4305 - Flusso d'aria teorico attraverso de la superficie utile fino a 75 l/h con Delta-p = 0,07 bar - Pressione di entrata dell'acqua > = 0,83 bar (WEP dinamico, 30 secondi) - Rango di temperatura -40 ° C / + 100 ° C - Grado di protezione IP66 / IP68 - 0,6 bar (60 min.) / IP69 Grado di protezione:IP66 / IP68 - 0,6 bar (60 min.)/ IP69

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Metal siding made from 20-gauge corrugated sheet metal provides a strong and durable solution for roofs and walls. These steel sheets are ideal for industrial, commercial and agricultural applications as they provide both protection from the elements and attractive aesthetics. With a thickness of 20 gauge (approx. 0.9 mm), they are resistant to external influences such as wind, rain and snow. Features and Benefits: High Strength: The 20-gauge sheet steel provides excellent load capacity and stability. Corrosion resistance: Often provided with a protective coating, the sheets are resistant to rust and other signs of corrosion. Weather Resistance: Corrugated structure improves water drainage and increases structural integrity. Versatility: Suitable for roofs, facades and other structural applications in various building types Easy installation: privacy screen corten steel

M16 x 170mm Partially Threaded Hex Head Bolt Stainless Steel A2 - DIN 931. A wide range of Stainless Steel fasteners including Hexagon Head High Tensile Bolts Stainless Steel DIN 931 at cost-effective price available from A2Z Fasteners.

GENERAL MACHINE BUILDING PARTS Cladle Casting Method:Sand casting with core Material:En GJS 500-7 Single weight:25,70 Kg

Some of SPIROL's standard Pin Installation Models can be equipped with a pusher punch (in place of a pin insertion quill) to press Threaded Inserts into plastic assemblies. The most appropriate Installation Machine depends on the actual insertion force required to press the Insert into the plastic hole and the desired productivity. Generally speaking, the Model PMH Heavy Duty Installation Machine is typically used for low to medium volume installation, and for medium to high volume installation, SPIROL's Model PH/PHX Platen-Style Installation Machines can be used for simultaneous installation of several Press-In Inserts at the same or different elevations. Due to the length to diameter ratio of Press -In Inserts, it is not possible to cost-effectively tube feed this type of Threaded Insert with SPIROL's automatic feeding and Installation machines.

"TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.

Live Tools for machines: Doosan PUMA MX 1600 ST Doosan PUMA MX 2100 ST Doosan PUMA TT 1500 MS Doosan PUMA TT 1500 SY Doosan PUMA TT 1800 MS Doosan PUMA TT 1800 SY Available in the following versions: BENZ Solidfix® axial BENZ Solidfix® radial BENZ Solidfix® Double spindle Collet Chuck axial Collet Chuck radial Collet Chuck Double spindle Collet Chuck swiveling

Stanzteile aus Edelstahl gefertigt vom Coil auf 60 t b.z.w 130 t Pressen.

The pressure transmitter type DMP 333 has been especially designed for use in hydraulic applications with high static and dynamic pressure. The transmitter is characterized by an excellent long term stability, also under fast changing pressure as well as positive and negative pressure peaks. The modular concept of the device allows to combine different stainless steel sensors and electronic modules with a variety of electrical and mechanical versions.Thus a diversity of variations is created, meeting almost all requirements in hydraulic applications. Features: — nominal pressure: 0 ... 100 bar up to 0 ... 600 bar — accuracy:0.35 % (opt. 0.25 % / 0,1%) FSO — excellent long term stability, also with high dynamic pressure loads — insensitive to pressure peaks — high overpressure capability Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts — SIL 2 version according to IEC 61508 / IEC 61511

Posiadamy własną hartownię z odstraszaniem materiału w kąpieli polimerowej lub oleju. Ceny zależą od głębokości utwardzania, masy i modułów uzębionych artykułów. Możemy również utwardzać i czyścić inne elementy. Utwardzamy części zgodnie ze specyfikacją klienta. Utwardzanie do 3,0 mm nie jest rzadkością wśród naszych cenionych klientów. Zaopatrujemy już współpracowników i klientów z następujących branż: dostawców części samochodowych, budowy maszyn specjalnych, budowy mostów itp. Można również wykonać pojedyncze utwardzanie. Prosimy o zapoznanie się z naszymi innymi usługami i dostęp do profilu firmy. Jako niezależna fabryka kół zębatych Pritzwalk zajmuje się produkcją kół zębatych, wałów zębatych, kół drążonych z wewnętrznym uzębieniem, sprzęgieł zębatych i kołnierzy. Produkujemy i hartujemy z powodzeniem od 1969 roku, zaopatrując znane firmy i producentów przekładni zębatych w nasze produkty. Nasza fabryka znajduje się 200 km na zachód za Szczecinem.

Conveyor Belt Profiles

Produit à partir de résine (urée), granulée et classée en différentes dimensions. Cet abrasif nettoie les surfaces sans provoquer de rugosité ou d'altération dimensionnelle des pièces. Dureté: 3,5 mohs Forme: angulaire Densité: 1,45 - 1,52 g / cm3 Qualité: MIL-P-85891

La dérivation simple permet d’effectuer un piquage dans un réseau d’aspiration. Cette pièce est réalisé sur-mesure en fonction de votre besoin. Les informations suivantes sont à préciser : le diamètre du piquage (Ød2) et l’angle du piquage (30° ou à 45°) le diamètre de sortie (Ød3) Aussi, pour un meilleur rendement aéraulique, privilégier un piquage à 30°. Dimensions:200 mm Angle:30°, 45°

Glissières en inox 1.4301. Cages à billes en inox 1.4301. Billes en inox 1.4034. Glissières polies. Cages à billes polies. Billes polies. Pour les glissières télescopiques avec super extension, la course est supérieure à la longueur du rail. Enclenchement en position ouverte. Le tiroir peut être facilement retiré et séparé du rail de guidage en actionnant le levier de déblocage. La capacité de charge dynamique des glissières télescopiques indique la contrainte maximale d'une paire de glissières montées sur chant avec utilisation de l'intégralité de la course d'extension. Les capacités de charge indiquées ont été déterminées avec un espacement des glissières de 400 mm et font référence à la valeur maximale pour 10 000 cycles. La capacité de charge est inférieure de 75 % en cas de montage à plat. La hauteur de la tête des vis de fixation ne doit pas dépasser 2,5 mm, sinon il existe un risque de collision avec d'autres parties de la glissière. Référence:21334-95 Remarques concernant la commande:Vendus par paire Indication de dessin:Trou de fixation pour 21334-95-0305 non présent

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Not designed for steady motion of the tube Attachment:screw-in Configuration:T Applications:Pneumatic Material:stainless steel 1.4301 / 1.4307 Sealing:seal Other characteristics:Release sleeve Thread:withworth pipe thread

Ensemble de rayonnage pour palettes constitué d'un module de départ composé de : 2 montants verticaux avec échelles de renfort en diagonale et 4 lisses horizontales. Combinaison possible de plusieurs tailles de racks Montage simple et rapide Rayonnage de départ (Plusieurs tailles au choix 1825/2225/2700/3300/3600) comprenant : - 2 montants verticaux avec échelles de renfort en diagonale - 4 lisses horizontales En option : *Extension *Bac de rétention au sol en acier ou PE *Bac de rétention suspendu en acier ou PE (à placer en hauteur sur les lisses)

razbijalec za tlačno litje aluminija - kaljen ter obdelan v tolerance 0.02mm

WORK BENCHES

Las claraboyas son el elemento idóneo para aportar luz y ventilación naturales a la vivienda y gran superficie, con el consiguiente ahorro energético.

M10 x 150mm Partially Threaded Hex Head Bolt Stainless Steel A2 - DIN 931. A wide range of Stainless Steel fasteners including Hexagon Head High Tensile Bolts Stainless Steel DIN 931 at cost-effective price available from A2Z Fasteners.

We manufacture milled parts in all dimensions and shapes: from large milled workpieces to small parts that require increased precision. We have extensive experience in manufacturing custom milled parts for various industries and uses: the heavy industry, the automotive and aeronautics industry, the food and agriculture sector, the medical, research, and pharma sectors. Our modern park of CNC milling machines allow us to deliver flawless milled parts in the shortest time. - 3axis, 4 axis, and 5 axis machines. - From 10 x 10 x 10mm to 2000 x 10000 x 1500mm. The materials we usually use are steel, stainless steel, and aluminum but we can also use brass, cast iron, plastic.

Ball Bracket - Z Shape B12051 Weight:0,020 KG Pressure:< 500N White zinc plated (Zn/White):B12051 Black zinc plated (Zn/Black):B12051-1 Yellow zinc plated (Zn/Yellow):B12051-2 Shiny nickel plated:B12051-3

Eye Connectors Y002 Material Information:Steel ,DIN 1.0718 Surface treatment:Zinc plated Compatible with:S15 Components:Y002 Unit Weight:0,008 KG

Available as rings, bands , stripes or coils for all OEM specifications i.e Samp, Henrich Niehoff..-Nickel (99,2%) Copper / Elmedur in a highly demanding quality cut to exact diameter with precisely cut ends or over lapping ends, exact fit , even roundness, fast and easy exchange , reducing costs due to the very high material

One space galvanized grounded-based bike rack with fixed wheels. Upper curve is a patented system designed by ANDRYS Ltd in order to set even the disk brake bikes SKU:Art. 1308 Size:35 x 35 cm h 32 cm Weight:2 kg Dimensions :41 × 41 × 33 cm

De SicoMat® biedt een hoge productiviteit en maximale robuustheid: kenmerken die met name nodig zijn in de scheepsbouw en de vervaardiging van windmolens. Met schuine snijkoppen voor autogeen en plasma, een breed spectrum van markeerprocessen en de mogelijkheid om een zandstraal- of schuurkop te installeren, dekt de Sicomat® alle productievereisten.

Die Enden der Drahtbiegeteile können gefast, eingestochen, gedreht, gebohrt, gefräst und geprägt, als auch mit geschnittenem Gewinde oder gewalztem Gewinde geliefert werden.

ABES Poller 006-2 ist ein Absperrpfosten aus Aluminiumguss, dessen Form nach oben und unten konisch zuläuft. Befestigung Zum Herausnehmen mit 3p-Technologie, bestehend aus einer Bodenhülse, einem Verbindungsstück mit Sollbruchstelle, zwei Spannkegeln und einer 6-Kantschraube. Alternative: Version zum Einbetonieren. Ausführung – Pulverbeschichtung in Standard-RAL-Farben oder DB 703. Die Grundausstattung für ABES Poller 006-2 mit 3p-Technologie umfasst: – Poller, Aluminiumguss, pulverbeschichtet nach RAL oder DB 703 Eisenglimmer – Abmessungen (H über Grund x Ø in mm): 870 x 95/120 – Bodenhülse 300 mm (000.001), verzinkt – Verbindungsstück (000.008), verzinkt – Spannkegel-Paar 6-Kant (N1+N2+6-Kantschraube), Edelstahl 1.4301 (000.004) Typ:für öffentliche Bereiche, für Schulen, für öffentliche Einrichtungen, für Kindergarten, Parkplätze Material:Aluminiumguss Eigenschaft:ortsfest, herausnehmbar mit 3p-Technologie

Die KMH GmbH bietet Systemlösungen für Energieversorgungsunternehmen und für die Industrie an.